How to Make Your Clawfoot Tub White Again

Cleaning a bathtub has to be one of the worst chores on your chores listing. It's awkward to crouch over and try and fit yourself in the tub. And it takes a lot of elbow grease to get rid of stubborn stains and soap scum.
Considering we know how annoying cleaning a tub can be, we put together a pace-by-step guide ofhow to clean and get a bathtub white over again with minimal endeavor.
Notation: Don't want to make your own DIY bathtub cleaner? Option upwardly Better Life'south Natural Tub and Tile Cleaner, made with tea tree and eucalyptus, this tub cleaner works against hard-set stains.
Otherwise, read on to acquire how to make our own cleaning solution, and get your bathtub clean again.

1. Gather Your Materials

Offset your bathtub cleaning process by getting everything y'all need in ane place:

• Baking soda.
• Dish lather.
• White Vinegar.
• A sponge or scrub brush.
• Papers towels or washable microfiber cloth.
• Rubber gloves (optional, merely it's nice to avoid that vinegar smell on your easily).

2. Microwave the Vinegar

Pour ¼ cup of white vinegar into a microwave-condom basin and put it in the microwave for no more than ninety seconds. Yous want warm h2o, non humid hot h2o.

iii. Pour Dish Soap Over the Tub

Take dish soap and pour it (or squirt it) over the surface of the tub. You don't demand it to be covered in lather just y'all want to be able to cover the entire surface with lather in one case you start scrubbing.

4. Add warm vinegar

Take your cup of warm white vinegar and pour that over the soap. Don't scrub just nonetheless.

5. Add baking soda

Take around four tablespoons of baking soda and sprinkle that over the tub. Now y'all have your baking soda layered on top of your soap which is layered over the tub.
You've basically have created a cleaning solution over your entire tub.

6. Scrub that tub

This will (hopefully) be the hardest you accept to work. Have the crude side of your sponge and scrub your tub down. Try to cover every inch of your tub merely really focus on the dirty/soiled parts. These parts will need a little extra elbow grease.
Afterwards y'all've scrubbed it down, allow this lathery solution sit down for about xxx minutes to an hour. You lot're letting the mixture really break down whatsoever crud, stains, or mineral deposits.
Note: If you're looking to become

vii. Wipe downwardly information technology downwardly and rinse

Later on the time is up, accept your paper towels or washable cloth and wipe down your tub. The grime and stains should be lifting right off. And then y'all can rinse the entire tub down by running your faucet and using a cup to collect water and and so spill it over your entire tub.
If your tub still has some stains, it might need another circular of cleaning.

How to Clean Shower Heads and the Tub Faucet

Despite what you'd think, showerheads tin become very dingy. This is mainly an issue in homes hard water causes mineral deposits in your shower head nozzles. This results in uneven and weak water flow. In short, your dirty shower head is giving you lot a lackluster shower feel.
Luckily, in that location's an easy fix.

1. Take a zip-lock bag from your kitchen and grab a rubber band. The bag needs to be big enough to fit over the showerhead but not so big that the cleaning solution you're about to make won't piece of work.
2. Make full up your zip-lock bag with a cleaning solution. We recommend white vinegar but if y'all want y'all tin use a shop-bought cleaner that is designed to remove build-ups such every bit calcium, magnesium, and rust.
3. Put the showerhead into the aught-lock pocketbook.  Y'all want the showerhead'due south unabridged forepart face up submerged into the mixture. Then you use your rubber bands to secure the handbag to the showerhead.
4. Allow it sit for 30 minutes to an hour. Once the fourth dimension is up, remove the bag and throw it away. So wipe downwardly downwards the showerhead with a washable fabric and and so turn it on the faucet. Relish your new, even and powerful water menstruation.

Notation: If your showerhead is clean simply still giving your poor flow, it might be fourth dimension for a new ane. If you want to learn more, we put together a list of the all-time showerheads.

How to Bleach a Bathtub to Remove Mold and Mildew

Sometimes only cleaning your bathtub isn't plenty – no matter how hard you lot scrub. Plus, it's good to, every now and so, employ bleach to clean your bathtub considering bleach kills mildew and mold.
A lot of commercial bathtub cleaners will apply a little bit of bleach in their formula.
Simply sometimes the cheapest – and almost effective – mode to bleach a bathtub is just to use pure bleach and h2o.
This mixture will remove bacteria from your tub while whitening the enamel surface.
In this post, we're going to show y'all how to bleach a bathtub in 7 steps. Before we get started, some things to know:

• Nosotros're handling bleach, and then please vesture cleaning gloves and some kind of protective eyewear (even sunglasses are better than zero, you don't want to splash bleach into your optics).
• You'll demand an empty spray bottle, a sponge, bleach (nosotros like Clorox simply whatsoever make of bleach will work), and water.
• We recommend yous do this at night so your bathtub will be ready to utilise the next morning.

i. Make sure yous tin can ventilate your bathroom

Bleach fumes are potent. If you've ever cleaned with bleach before your eyes have probably teared up. If y'all're cleaning a really dirty tub with bleach, then you're going to be close to the bleach while you scrub.
Instead of coughing up bleach flumes, make sure your bathroom has good air apportionment going.
If you have a window, open it upwards.
If you don't have a window, brand certain the bathroom fan is on and the bathroom door is open.
If yous feel lightheaded or sick after breathing in bleach fumes, take a break.

ii. Prepare your tub for a deep-bleach make clean

This ways accept out shampoo bottles, any loofahs, shower caddies, soap dishes. If you have an anti-slip mat, remove that.
All you lot want in your tub are the stains and mold and mildew that you're going to clean abroad with bleach.

three. Fill the tub with two gallons of water

Offset, rinse out the tub, getting whatsoever loose hairs or dirt out of the way.
Then make full the tub up with two gallons of water.
Notation: If you don't have an empty gallon container ready to utilize, only leave your bath faucet running for anywhere between 1 to 2 minutes. As nearly faucets pump out water 2.2 gallons per minute.
After you've filled the tub with water it's time to . . .

4. Add the bleach

The ratio of bleach to h2o should be 1:1. So one cup of bleach for every gallon of water. In this case, add 2 cups of bleach.
Withal, if y'all have a actually dirty tub that needs a deep make clean, and so yous can add more bleach using a one:2 ratio.
But go along in mind that this means the beach fumes will be stronger.

5. Spray down the tub walls

Take an empty water canteen and fill it upward with equal amounts of bleach and water. So spray this mixture over the tub walls.
Allow the tub and walls soak upwards the bleach for at to the lowest degree 15 minutes.

half-dozen. Scrub downward the walls and tub

After those 15 minutes have passed, put back on your gloves and protective eyewear, and scrub down the tub walls and the tub itself with a sponge. We like this special bathtub sponge because it has a handle, making it easy to get a skillful grip.
In our feel, you shouldn't spend more than five minutes scrubbing.
If you're scrubbing hard for five minutes and there are stains still non coming off, nosotros've had some luck using Mr. Make clean Magic Erasers on tough to remove stains.

vii. Wash the filth abroad!

Open up upwards your bleed, letting the bleach and dirty water run downwards the bleed. So take your shower head and wash down the tub. Or if it's not removable, and then fill up upward a large cup with h2o and rinse off the walls and the tub.
Leave the fan, the window open up, and the door open to permit the bleach fumes dissipate out of your bathroom.

FAQs

What is the best bathtub cleaner?

We like the unproblematic, non-abrasive solution in our list higher up. But if you need something more heavy-duty, check out our list of the all-time bathtub cleaners of 2022.

Is my tub porcelain or enamel?

To effigy out if your tub is porcelain or enamel, just stick a refrigerator magnet on the side. If it's enamel, your magnet will stick to the side. If it's porcelain, the magnet won't stick.

Can y'all use bleach on a bathtub?

Yes, bleach is smashing at killing mold, mildew, and other bacteria.
You don't need to employ bleach every time you clean your bathtub, just it'southward a good idea to bleach a bathtub every now and again or bleach a bathtub when y'all move into a new dwelling to brand sure you're using a clean and good for you tub.

For more business firm cleaning tips and dwelling house improvement guides, encounter our posts on:

• How to clean your toilet
• How to clean your grout (with baking soda)
• Steam make clean vs. shampoo carpet: which is better?
• How to shampoo your carpet (without a machine)

Chapter note : We are in function supported by affiliate partnerships. If you purchase a product based on our recommendation we may earn a commission.

davispromper.blogspot.com

Source: https://comfydwellings.com/how-to-get-a-bathtub-white-again/

Share this post